The Browning Recon Force BTC-7FHD trail camera has a solid metal mounting plate on the back. Good luck ripping this camera off the tree Mr. Black Bear.
The door and latch system to access the control panel and SDHC memory card on the BTC-7FHD trail camera.
A DIY 12V NiMh Rechargeable Trail Camera Battery Pack attached to the external 12v power port on the Browning Recon Force trail camera.
In February of 2015 I was able to get my first Recon Force (BTC-7FHD) trail camera, the newest trail camera from Browning. After a couple weeks of testing the camera I am just amazed with the video quality this camera produces.
The camera takes full HD 1920x1080 video. The quality of the audio is also top notch. The video is saved in H264 MP4 format on a SDHC card.
I have just really been blown away by the videos this camera produces. I thought the HD videos the older Browning Trail cameras produce where awesome, now they just don't quite compare.
The camera uses the single buckle latch on the lower half of the camera. Browning used this latch on the sub micro Strike Force trail camera last year. I like this system over the double snapping buckles from the older Recon Force cameras.
I have noticed that the camera does an awesome job with getting triggered by even small critters like robins and cats and raccoons that are 20 yards away from the camera.
Another feature I really like is that the plastic mounting brackets have been replaced with a solid steel plate that covers much of the back of the camera. This will greatly help the camera from being broken off a tree by a bear or an operator trying to wedge a shim in between the camera and the tree while the camera is cinched on tight. Not that that hasn't ever happened to me. ;)
One thing that I have found with this camera is that it does chew through batteries a little faster than the past models. Taking video uses a lot more battery than just taking images. More battery consumption was expected given that it writes more to the SDHC card and captures so much more detail. To help with making sure the camera has plenty of juice between checking it I have made a DIY 12V NiMh Rechargeable Trail Camera Battery Pack.
I also found that set to capture 30 second video clips the camera took 386 videos before the 32 GB SDHC SD card filled up. Many of the videos it captured were 10 second LED infrared lighted ten second videos at night of raccoons. The ten second black and white videos don't take as much space on the SD card. A little math on the file size on the 100,000 KB file size of a 30 second clip gives me 320 videos to fill a 32 GB card.
I picked up some 64 GB cards to try but the camera shows an error. Darn it! There have been many times that my favorite springs to watch for elk have filled up my 32 GB SD cards with the smaller HD videos from my old cameras in less that two weeks. It sure would be nice to be able to use 64 or 128 GB cards. Looks like I'll have to check this camera a little more frequently. I guess the camera isn't quite perfect but it's getting close.
Included on this post are some sample videos from the first few weeks of using the camera. Wow! Just awesome quality for a trail camera.
Thanks to this camera I will now be trying to upgrade my cameras to the new Recon Force Full HD cameras. I may also try the new Strike Force BTC- 5HD camera as it also has better video... although probably now quite as good as this Recon Force.